Mikrotik

Wersja z 08:54, 17 cze 2013

Skrypt do konfiguracji urządzeń Mikrotik.

Konfiguracja Mikrotik

Skrypt

W odpowiednie miejsca należy wpisać odpowiednie dane (loginy, hasła, adresy IP)

# may/27/2013 11:20:45 by RouterOS 6.0rc13
# software id = 2AQU-CN1X
#
/interface ethernet
set 0 name=ether1
set 1 name=ether2
set 2 name=ether3
/interface wireless
set 0 band=2ghz-b/g disabled=no frequency=2442 l2mtu=2290 mode=ap-bridge \
    name=wlan14 ssid=Mikrotok wireless-protocol=unspecified
/ip neighbor discovery
set wlan14 discover=no
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m
/ip pool
add name=dhcp_pool1 ranges=192.168.25.2-192.168.25.254
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=wlan14 name=dhcp1
/port
set 0 name=serial0
/ppp profile
set 0 local-address=78.31.88.252
/interface pppoe-server server
add authentication=chap disabled=no interface=wlan14 one-session-per-host=yes \
    service-name=testowy
/ip address
add address=78.31.88.252/24 interface=ether2 network=78.31.88.0
add address=192.168.25.1/24 interface=wlan14 network=192.168.25.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether2
/ip dhcp-server network
add address=192.168.25.0/24 dns-server=78.31.90.58 gateway=192.168.25.1
/ip dns
set allow-remote-requests=yes servers=78.31.90.58
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=jump chain=forward jump-target=ppp
add action=add-src-to-address-list address-list=przekierowanie \
    address-list-timeout=10m chain=przypominajka dst-address=!78.31.90.8
add chain=forward comment="Akceptujemy ruch dnsa" dst-port=53 protocol=udp \
    src-address-list=przekierowanie
add chain=forward comment=\
    "Akceptujemy ruch o strony z komunikatem i do panelu usera" dst-address=\
    78.31.90.8 src-address-list=przekierowanie
add action=drop chain=forward comment=\
    "Blokujemy ruch z komputer\F3w z komunikatami" src-address-list=\
    przekierowanie
/ip firewall nat
add action=redirect chain=dstnat comment=Przekierowanie dst-port=80 protocol=\
    tcp src-address-list=przekierowanie to-ports=8080
add action=masquerade chain=srcnat src-address=192.168.0.0/24
add action=masquerade chain=srcnat src-address=10.0.10.0/24
/ip proxy
set enabled=yes max-cache-size=none src-address=78.31.88.252
/ip proxy access
add comment="Akceptujemy ruch do strony z komunikatem" dst-address=78.31.90.8
add comment="Ruch do mBank" dst-host=*.mbank.pl src-address=0.0.0.0/0
add comment="Ruch do mBank" dst-host=*.mbank.com.pl src-address=0.0.0.0/0
add comment="Ruch do BZWBK" dst-host=*.centrum24.pl src-address=0.0.0.0/0
add comment="Ruch do BZWBK" dst-host=*.bzwbk.pl src-address=0.0.0.0/0
add action=deny comment="Przekierowujemy ruch na adres url" dst-port=80 \
    redirect-to=nowynet.ostrog.net/notification src-address=0.0.0.0/0
/ip proxy direct
add action=deny src-address=0.0.0.0/0
/ip route
add distance=1 gateway=78.31.88.254
/ip traffic-flow
set enabled=yes
/ip traffic-flow target
add address=78.31.90.8:12345 version=5
/ppp aaa
set interim-update=15m use-radius=yes
/radius
add address=78.31.90.8 secret=amen service=ppp
/system clock
set time-zone-name=Europe/Warsaw
/system logging
add disabled=yes topics=radius
add disabled=yes topics=pppoe
add disabled=yes topics=ssh
add action=disk disabled=yes topics=debug
/system ntp client
set enabled=yes mode=unicast primary-ntp=78.31.90.8
/system routerboard settings
set cpu-frequency=533MHz